ISO NK65/25 needle roller bearings

da min:40 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Dynamic load, C:16 kN; Radial clearance class:CN; Fatigue limit load, Cu:0.47 kN; Static load, C0:10.3 kN; f0:14.8; Min operating temperature, Tmin:-25 °C; Characteristic rolling element frequency, BSF:5.95 Hz; d:35 mm;

Basic Static Radial Load Rating Co:160000 N; Fillet Radius rb:1.00 mm; d:90.000 mm; B:43.00 mm; D:190.0000 mm; Grease Speed Rating n1:7800 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:11000 rpm; Basic Dynamic Radial Load Rating C:186000 N;

B:21.00 mm; d:35.000 mm; Basic Static Radial Load Rating Co:8500 N; Grease Speed Rating n1:7500 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:9000 rpm; D:80.0000 mm; Basic Dynamic Radial Load Rating C:26500 N;

Cor - Static Load Rating:82280 lbf; Shaft Size:3-11/16 in; Dimension V:0.1 in; Maximum Speed:2340 rpm; Dimension H:3.4 in; Bearing UPC:013992058881; Bolt Size:4 x M16; Dimension N:9.625 in; Support Type:Round Flange; Bearing Type:Split Cylindrical Re;

Recommended tightening torque for set screw:16.8 Nm; J:150 mm; Designation of bearing:UC211-35G2T04; B:55.6 mm; e:13 mm; s1:27.8 mm; C0:29.2 kN; H3:125; N:19mm; Z:37.7 mm;

H2:83 mm; Designation of bearing:ES206-19G2; L1:54 mm; Recommended tightening torque for set screw:8 Nm; N1:21 mm; S:9 mm; A1:30 mm; L:165 mm; B:23.8 mm; C:19.5 kN;

Internal Special Features:No; Da max:28 mm; Inventory:0.0; Dynamic load, C:6.1 kN; Static load, C0:2.75 kN; f0:12.7; Ca min:2.92 mm; Mass:0.04 kg; Db min:37.5 mm; Other Features:Deep Groove | With S;

A:21 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC201-08G2T20; H:78 mm; A5:18.3 mm; Weight:1.61 kg; d:12.7 mm; H2:41 mm; T min.:-20 °C; C0:6.65 kN;

Support Type:Round Flange; Dimension R:18.3 in; Cor - Static Load Rating:232453 lbf; Maximum Speed:1320 rpm; Dimension P:1.0 in; Bearing - Housing - Seal:MSM150BRHRSS; Dimension H:4.9 in; Cr - Dynamic Load Rating:164111 lbf; Ca - Axial Load Rating:11780 lbf; Note:This product line wa;

Characteristic outer ring frequency, BPF0:2.57 Hz; da max:38.5 mm; Dynamic load, C:26.7 kN; Mass:0.28 kg; f0:12.4; Fatigue limit load, Cu:0.64 kN; Characteristic rolling element frequency, BSF:3.52 Hz; d:28 mm; D:68 mm; Nlim (grease):7,400 rpm;

Aa - Cage-Cone Backface Clearance:0.31 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:59500 lbf; G1 - Heat Generation Factor (Roller-Raceway):295.4; C1 - Dynamic Radial Rating (1 million revolutions)6:132000 lbf; Cone Part Number:HM926745; Ab - Cage-Cone Frontface Clearance:0.

Nlim (grease):14,000 rpm; Fatigue limit load, Cu:0.36 kN; Characteristic outer ring frequency, BPF0:2.57 Hz; Mass:0.14 kg; Characteristic inner ring frequency, BPFI:4.43 Hz; f0:12.4; Brand:NTN; Max operating temperature, Tmax:120 °C; B:15 mm; Radial clearance class:CN;

C90 - Dynamic Radial Rating (90 million revolutions)4:62100 lbf; Db - Cup Backface Backing Diameter:230.12 mm; db - Cone Backface Backing Diameter:167.89 mm; d:120.650 mm; Aa - Cage-Cone Backface Clearance:14.2 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:240000 lbf; Cage Type:Stamped Ste

G:M130x2; Weight:2.90 Kg; D3:155 mm; Locknut:KML26; d1:4 1/2 in; Lockwasher and Lockplates:MBL26; L1:80.00 mm; Appropriate Hydraulic Nut:HMV26; C:23 mm;

C0 - Static Load:54100 lb; Shaft Size  :2-1/2 in; Pre Install Clearance Max:0.0037 in; Dimension E:6.000 in; Dimension L:3.21 in; Grease Lubrication - M/N Seal:1600 rpm; Dimension N:2.550 in; Dimension BC:8.47 in; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension RVV:0.88 in;